Setup Options - Auto Load

To configure, navigate to SITE COMMAND->SETUP OPTIONS

Auto Load allows you to configure if you wish for Vehicles loaded in the Queue to initiate the "Loading" sequence either Manually, Via the Auto Dolly Treadle, or by external WashAPI or AutoCashier Line Support.

0 - None: Must be initiated by pressing START on the Entrance Station HMI or a configured "Wash Start" Input.

1 - Front Tire: Use the First detected tire by the Auto Dolly Treadle to initiate the loading sequence.

2- Rear Tire: Use the Second detected tire by the Auto Dolly Treadle to initiate the loading sequence.

3 - Auto Cashier: Use the WashAPI or Cashier Inputs to Auto-Start the Wash sequence.

If desired, you can also "Delay" this auto-firing by setting a delay in seconds. This could be useful when you want to give yourself time to prep the car with chemicals or blast off caked on mud with a prep gun!