Discrete Input - Type - 5 - Wet Down Button

Type - 5 - Wet Down Button

This input, when on (predefined as a normally open contact) will instruct the system to run a Wet Down procedure;  all outputs assigned "Include in the WetDown procedure" will turn on as per your Wet Down configuration.  This input is typically used when operators would like a physical push button to activate a Wet Down procedure, in addition to the Wet Down software button(s) available via HMI.

To learn more about a Wet Down, please see article Wet Down - What is it?

To learn how to configure a Wet Down, please see article Setup Options - Wet Down

For a full explanation of outputs, a detailed description of the general configurations shared by all outputs, and how to assign an output to the Wet Down procedure, please reference the article Outputs.

For a full explanation of inputs as well as a detailed description of the general configurations shared by all inputs, please reference the article Discrete Inputs Summary

Active Input

Active Input Toggle switches input between being 'used' and 'not used' as it relates to the controller. When toggled OFF, input will not affect the controller status in any way.